|

Build Your Online Product Catalogs?
Product Name: |
BLE bluetooth module RF-SM-S02 ibeacon modules
|
Supply Ability: |
10 million |
Related proudcts |
ble module, |
Specifications |
Please refer to the products detail below |
Price Term: |
FOB |
Port of loading: |
China Ports |
Minimum Order |
500 |
Unit Price: |
5 |
|
RF-BM-S02 (co***ct size£¬non full pin): Please refer to£ºhttps://www.bluetooth.org/tpg/EPL_***ail.cfm?ProductID=34109
RF-BM-S02 BLE module applies CC2540 from TI as core processor. The module runs at 2.4GHz ISM band, with GFSK (Gaussian Frequency Shift Keying) modulation scheme. It has 40 channels (channel ***ce at 2MHz), among which there are 3 fixed radio channels and 37 data channels of adaptive automatic frequency hopping. Physical layers can be combined with classic Bluetooth RF to form a dual mode device. And 2 MHz¡¯s channel ***ce can prevent interference from adjacent channels better. Besides, it has a wide output power adjustment (-23 dBm ~ 4dBm) and a high gain receiving sensitivity of -93 dBm.
Features£º 1. Easy to use, no need of any experience of Bluetooth protocol stack application 2. UART design for user interface, full-duplex bi-directional communication, and supporting the minimum baud rate of 4800 bps; 3. Supporting bridge mode (USART tran***rent transmission), and direct-drive mode (no additional MCU needed); 4. Default connection interval of 20ms, which makes quick connection; 5. Supporting software reset module by AT command, and access to the MAC address;
Features: - Bluetooth 4.0 single mode Compliant ISM 2.4GHz module. - Utilizing the TI CC2540/1 SoC with 256K Flash, 8K RAM. - Supporting master and slave modes - Integrated Bluetooth Low Energy stack including ATT,GATT, SMP, L2CAP, GAP - Over 70 meter (230 ft) line of site (LOS) distance with integrated antenna. - Can be externally controlled via simple ASCII AT commands over the UART or programmed with custom applications embedded in the module. - RSSI monitoring for proximity applications - 10-bit ADC - Serial Interface (UART / SPI) - Wake-up interrupt & Watchdog Timer - AES Security Coprocessor - FCC, RoHS, and Bluetooth&©|194;&©|174;
Operating Conditions Summary: - Supply voltage: 2.0 to 3.6V - VDD ripple: 100 mV Max - Max voltage on any pin: VDD + 3V - Supply Temperature Range: -20 to +60 |
Company: |
Shenzhen RF-Star Technology Co.,Ltd.
|
Contact: |
Mr. Stephen HO |
Address: |
2F,Block 8,Zone A,Internet Industry Base,Baoyuan Road,Bao'an District |
Postcode: |
518051 |
Tel: |
86 755 8632 9829 |
Fax: |
86 755 8632 9413 |
E-mail: |
|
|
|
|